before you all go on a laughing fit

[Guest]

Welcome, Guest. Please login or register.

1 Hour 1 Day 1 Week 1 Month Forever

Login with username, password and session length

22/06/2023, 10:15 AM Syklone - ..... hi

18/02/2023, 07:10 PM Damit - https://discord.gg/fYqDFYx

18/02/2023, 07:09 PM Damit - join us on Discord https://discord.com/inv... ite/fYqDFYx

29/11/2022, 12:19 PM BoHiCa - YESSSSSS

26/10/2022, 04:27 PM Victor9-5 - yooooooooooooo!

21/05/2021, 06:19 AM DonutKing - First post

28/08/2020, 08:39 AM Damit - its because we are all on discord now mrx

29/07/2020, 07:42 PM MrX - Its a bit dead round here

29/07/2020, 07:42 PM MrX - Anybody playing COD 

26/03/2020, 10:52 AM Epsoma - Hey Team. Locked down in self isolation. Hope you all are good.

View All

[KARNAGE]

do you have a manual for this board?

yes I do and it tells me fuck all

[BoHiCa]

is it the quick guide or the manual?

http://www.gigabyte.com.au/support-downloads/download-center.aspx?kw=880GM-UD2H+

[KARNAGE]

"Multilingual Istallation Guidebook"

[BoHiCa]

104 pages

[DonutKing]

Karnage have you also plugged in the 8 pin power connector on the motherboard


Me reading this thread:

[Vert]

Wait so when you press power, the power LED lights up but nothing else happens?

[KARNAGE]

yep, and when I press the on button it does nothing. the "Power SW" plug for the case is plugged in right next to the "PWR LED" plug

and yes I also plugged the 8-pin connector.

*edit* and bohica, I took out the ram and trie dit and it's the same story

[Vert]

Mhmmk I had the same problem, take out the Power Led and leave it out. Reason being its a three-pin connector when it should only be two-pin and the middle pin is blank, using up another pin when it shouldn't.

Meaning that the power switch header is only plugged halfway or one of the pins is in the wrong slot.

[BoHiCa]

and you do have the power switch connector into pin 6&8 what color is the wires for you powerswitch

[DonutKing]

yep, and when I press the on button it does nothing. the "Power SW" plug for the case is plugged in right next to the "PWR LED" plug

Look at the front panel diagram in your manual. For revision 1.4 of that board, the power switch is NOT next to the power LED.

[BoHiCa]

Mhmmk I had the same problem, take out the Power Led and leave it out. Reason being its a three-pin connector when it should only be two-pin and the middle pin is blank, using up another pin when it shouldn't.

Meaning that the power switch header is only plugged halfway or one of the pins is in the wrong slot.

The front panel connector has both available either two pin in position 2&4 or a three pin in 15&17&19

[Chalice]

Me reading this thread:

LOL at this

[DonutKing]

OK I just checked all 3 revisions of that board, (whats the old saying about leading horses to water?) the manuals I downloaded all said that the connector next to the power LED is the chassis intrusion header, NOT the power switch.

So I'm betting you have connected the front panel headers incorrectly

[BoHiCa]

so if you look at this picture plug your power switch into the red pins6&8

[Chalice]

My head just exploded cuz i'd be trying to plug it into the big round black thing...that kinda looks like a power plug so I'd be heading there 1st stop




This may also help

I'S IS HELPING