ssd and os crashing

[Guest]

Welcome, Guest. Please login or register.

1 Hour 1 Day 1 Week 1 Month Forever

Login with username, password and session length

22/06/2023, 10:15 AM Syklone - ..... hi

18/02/2023, 07:10 PM Damit - https://discord.gg/fYqDFYx

18/02/2023, 07:09 PM Damit - join us on Discord https://discord.com/inv... ite/fYqDFYx

29/11/2022, 12:19 PM BoHiCa - YESSSSSS

26/10/2022, 04:27 PM Victor9-5 - yooooooooooooo!

21/05/2021, 06:19 AM DonutKing - First post

28/08/2020, 08:39 AM Damit - its because we are all on discord now mrx

29/07/2020, 07:42 PM MrX - Its a bit dead round here

29/07/2020, 07:42 PM MrX - Anybody playing COD 

26/03/2020, 10:52 AM Epsoma - Hey Team. Locked down in self isolation. Hope you all are good.

View All

[Budh]

Ok need some help guys , I bought an OCZ Agility 3 SSD 120g works great while i'm using it cant fault it .Problem is if it sits idle for say 15 mins or longer the OS crashes and is non responsive Is there a compatability issue with something or is the ssd not configured properly , need to update firmware has me totally fecked  any ideas with what the issue may be ?? apart from taking it out the back and pissing on it . 

[cowcar]

couple of things to check. First, AHCI mode selected for the drive when you installed? (bios setting)
Secodnly, switch off hibernate mode (win7 i pressume) this may be causing the issue and has been linked in the past with OCZ drives to causing problems with the ssd's.

[Budh]

Seriously i give up maybe it will be a better sinker .............. 

[BoHiCa]

further to cowcar's post disable all power management, i have not had to run any firmware on any of these drives.

What was the result of the hard drive mode in the bios?

Which version windows are u running?

[Budh]

AHCI mode was selected and win 7 , have disabled ssd for now and have gone back to old hdd , no dramas with old 1, only thing new is ssd and 6gbps cable could it be the cable ? only thing i havent tried .And it has the updated firmware that came on it version 2.22 i think

[BoHiCa]

could be cable, you could try using original cable (the cable you have the current hard drive running), or vice vera. nothing to loose.

[Budh]

Will try this along with other ports or the same port as other drive has been using...

[BoHiCa]

positive start, have you checked to see if the motherbaord has, driver update for storage or chipset.

then I would have a look at possible bios, read the readme against bios update to see if they make mention of fixing your issue, if so , worth, while running

[Budh]

Going to try this , have sent an email asking for replacement until i get a reply i will fuck around with it ....

[Budh]

Ball is rolling on replacement side , they needed the serial number first and now they  will advise on returns i also hinted on getting the vertex 4  as  replacement i can only hope........

[SolidSmiddi]

Update SSD firmware.
I have one the same SSD and had the same issue: All good now.

http://www.ocztechnology.com/ssd_tools/

.

[Budh]

Yes all good champ but it already has the updated firmware on it so its a dud .Will find out if its that ssd or not when new 1 arrives ..